Short answer
Staff sign in on the till by tapping their name and entering their own 4-digit PIN, the same PIN they use in the RestroFi app. The owner can set a separate Owner PIN in Dashboard → Staff. Once set, only that PIN opens Owner on the till.
Steps
Staff sign in with their own PIN
On the sign-in screen ('Sign in with your PIN') the staff member taps their name and enters their 4-digit PIN. What they can see and do on the till follows their role. PINs are set for each staff member in Dashboard → Staff.
Sign in by role
Under the list there is 'Sign in by role instead'. Pick a role on the 'Who's at this station?' screen. When the outlet uses PINs, a manager must approve the role with their own PIN. Owner, Admin and Manager always need approval.
Set or change the Owner PIN
In the browser go to Dashboard → Staff. On the owner card press Set PIN (or Change PIN). After this, only the Owner PIN opens the Owner role on the Connect till. A manager's PIN no longer does. Until an Owner PIN is set, the till shows a reminder to set one.
Change who is using the till
Click your name at the bottom of the left menu in Connect to switch operator (Switch operator is also in the command palette). The sign-in screen opens again for the next person.
Forgot a PIN
Staff PINs are managed from each person's card in Dashboard → Staff, where the owner can set, change or reset a PIN. Only the owner can set or change the PIN of a manager or admin. The Owner PIN is changed by the owner from the owner card using Change PIN. The Owner PIN cannot be viewed, only replaced.
PINs when the internet is down
Offline, the till can check only PINs that were already used on this till while it was online. Names that cannot be checked are greyed out. If the Owner PIN was never used on this till online, it cannot be checked offline. Have each manager and the owner sign in once on every till while it is online.
'No staff PINs set yet'
If the till shows this notice, anyone can pick a role without a PIN. Set PINs for your staff in Dashboard → Staff so each person signs in as themselves.
Related articles
What is RestroFi Connect and how do I install it and link my outlet?
RestroFi Connect is the desktop app for the billing PC. It is a full POS till, prints KOTs and bills to your printers with no clicks, and keeps billing when the internet drops. Download it from Dashboard → Settings → KOT & Printer Connect, then sign in and pick the outlet.
Working offline in RestroFi Connect: what works, how bills sync, and what to check afterwards
When the internet drops, RestroFi Connect keeps taking orders, printing and settling bills from the data saved on the PC. Everything is sent to the cloud automatically when the internet returns. Afterwards, check that the sync strip is gone and clear any 'bills need a manager' notice.
RestroFi Connect is not showing new orders or is not connecting
Check the two indicators in the top bar of Connect: Cloud (orders) and Print relay (printing). If Cloud is off, the PC cannot reach RestroFi and it is an internet problem. If both are on, check that the PC is linked to the right outlet and that your role can see the Orders screen.
Set an Owner PIN for the RestroFi Connect till
The Owner PIN locks the Owner sign-in on the RestroFi Connect till. Set it from the Owner card at the top of Dashboard → Staff. Once it is set, a manager's PIN no longer opens Owner.
Still stuck?
If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].