Skip to main content

RestroFi Connect is not showing new orders or is not connecting

Applies toRestroFi Connect (desktop)Web dashboard· Updated

Short answer

Check the two indicators in the top bar of Connect: Cloud (orders) and Print relay (printing). If Cloud is off, the PC cannot reach RestroFi and it is an internet problem. If both are on, check that the PC is linked to the right outlet and that your role can see the Orders screen.

Steps

  1. Check the Cloud indicator

    In the top bar of Connect, Cloud shows whether the PC can reach RestroFi. The bottom bar also says 'Cloud up' or 'Cloud down'. If it is down, open any website on the same PC. If the website also fails, fix the Wi-Fi, LAN cable or router first. Orders appear again by themselves once Cloud is back.

  2. Check the Print relay indicator

    Print relay shows whether the till can receive print tickets. If it is disconnected, orders can still show but tickets will not reach the printer. Tickets sent meanwhile are held and print when it reconnects. If it stays down while Cloud is up, close and reopen RestroFi Connect.

  3. Check the outlet name

    The outlet name is shown in the top bar. A PC shows and prints only the orders of the outlet it is linked to. If it shows another outlet, go to Connect → Settings, press 'Unpair this device', sign in again and choose the correct outlet.

  4. Check your role and tabs

    The screens you see depend on the role you signed in with. If Orders, Tables or KDS is missing, click your name at the bottom of the left menu to switch operator and sign in as a role that has it. The owner sets which tabs each role sees in Dashboard → Settings → KOT & Printer Connect under 'Desktop tabs by role'. The owner always sees every tab.

  5. Compare with the web dashboard

    Press Open Web Dashboard in the top bar of Connect and look at Live Orders. If the order is in the dashboard but not in Connect, restart Connect and check the outlet. If the order is not in the dashboard either, the order was never placed. Check the customer's QR link or the ordering page.

  6. Check the dashboard side

    In Dashboard → Settings → KOT & Printer Connect, look at the PC under Paired devices. Offline means the dashboard has not heard from that PC recently: the PC is off, asleep or without internet, or Connect is closed. If the PC is not in the list at all, it was unpaired. Pair it again.

  7. If the bottom bar shows 'Sign-in storage issue'

    Connect could not save its sign-in on this PC. Unpair this device from Connect → Settings and sign in again. If it returns, send the details below to support.

  8. Keep the PC awake

    A PC that goes to sleep stops receiving orders and tickets. In Connect → Settings switch on 'Keep display on' and 'Start on login'.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].