Skip to main content

Set an Owner PIN for the RestroFi Connect till

Applies toWeb dashboardRestroFi Connect (desktop)· Updated

Short answer

The Owner PIN locks the Owner sign-in on the RestroFi Connect till. Set it from the Owner card at the top of Dashboard → Staff. Once it is set, a manager's PIN no longer opens Owner.

Steps

  1. What it protects

    On a shared till, anyone who can open Owner gets owner-level access. Without an Owner PIN, a manager-level PIN can open it. With an Owner PIN, only that PIN opens Owner. Admin, Manager and other staff sign-ins do not change.

  2. Sign in to the web dashboard as the owner (with your own email, not a staff login) and go to Dashboard → Staff.

  3. At the top of the Team view find the card with your name and the Owner tag. Click "Set PIN", type 4 digits and click Save. The card then says "Owner PIN is on."

  4. Change or remove it

    Click "Change PIN" on the same card. Enter a new PIN and Save, or click "Remove PIN" to go back to the old behaviour.

  5. Forgot the Owner PIN

    The Owner PIN cannot be shown again. Sign in to the dashboard with your password and set a new one with "Change PIN". One Owner PIN covers every outlet you own.

  6. If you do not see the card

    The card is shown only to the owner of the outlet. Admin staff and managers cannot see or set it.

  7. On the till

    A wrong PIN shows "Wrong PIN. Try again." After repeated wrong tries the till shows "Too many attempts. Wait 10 minutes." If the internet is down, the Owner PIN works only on a till where you have already used it once while online.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].