Skip to main content

How to add a printer (USB, Wi-Fi or LAN, Bluetooth)

Applies toRestroFi Connect (desktop)Phone appWeb dashboard· Updated

Short answer

Printers are added on the device that talks to them, not in the browser. On a billing PC use RestroFi Connect → Printers (USB, Wi-Fi or LAN, Bluetooth). On a tablet or phone use the RestroFi app → More → Printers (Bluetooth on Android, Wi-Fi or LAN on Android and iPhone or iPad).

Steps

  1. USB printer on the billing PC

    Plug in the printer and switch it on. If Windows needs a driver for it, install the driver first. Open RestroFi Connect → Printers and press Auto-detect. Under Printer mapping pick the printer for Counter (Bills), Kitchen (KOT) or Bar (KOT), then press Test on that row.

  2. Wi-Fi or LAN printer on the billing PC

    The printer must be on the same network as the PC. In RestroFi Connect → Printers go to Wi-Fi printers and press Scan Wi-Fi printers. If it is not found, use Add by IP address: type the printer's IP address (print the printer's own network sheet to find it), keep the port as 9100 unless your printer uses another, press Test connection, then choose a role under 'Assign to role'.

  3. Bluetooth printer on the billing PC

    In RestroFi Connect → Printers go to Bluetooth printers and press Pair new printer. This opens the Windows Bluetooth settings. Pair the printer there, come back and press Scan for Bluetooth printers, then choose a role under 'Assign to role'. A paired Bluetooth printer shows up as a COM port.

  4. Printer on an Android tablet or phone

    In the RestroFi app open More → Printers (staff logins: Profile → Printers). For Bluetooth, pair the printer in the tablet's Bluetooth settings using 'Pair a new printer', press Refresh list and tap the printer. For Wi-Fi, enter the IP address and port (usually 9100) and tap 'Check and use this printer'. Then choose the paper width and switch on Bills, Kitchen tickets or Bar tickets.

  5. Printer on an iPhone or iPad

    iPhone and iPad print to Wi-Fi or LAN printers only. Bluetooth printers are not available there. Enter the printer's IP address and port in More → Printers and tap 'Check and use this printer'.

  6. Make one tablet print automatically

    Only one tablet prints tickets on its own for the outlet. On that tablet switch on 'This tablet prints for the outlet' in More → Printers. Other tablets print only what a person taps. If a Connect till is already paired, do not switch this on, or the same ticket will print twice.

  7. Send a test print and check the dashboard

    Use Test in Connect or Test print in the app. Then open Dashboard → Settings → KOT & Printer Connect. The new printer appears in the Printers card with its roles, and you can press Send test print from there too. Printer addresses cannot be edited from the dashboard. They are set on each device.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].