Short answer
RestroFi has three printer roles: counter bill, kitchen KOT and bar KOT. Each menu item is routed to Kitchen or to the drinks station, and each role is mapped to a printer on the device that prints. Fix the item's Prep station or the role mapping.
Steps
Know the three roles
Bills print on the counter bill printer. Food KOTs print on the kitchen KOT printer. Drinks KOTs print on the bar KOT printer, but only when the separate drinks ticket is switched on. Without that switch every item prints on one kitchen ticket.
Switch on the separate drinks or bar ticket
Go to Dashboard → Settings → Print. In the stations card switch on 'Enable bar station' (bar outlets) or the 'Separate drinks ticket' switch (the wording is Barista for a cafe and Drinks for other outlets). Press Save stations. Every order then prints two tickets, one for drinks and one for food.
Set the station on each menu item
Go to Dashboard → Menu and edit an item. Under Prep station choose Kitchen or the drinks option (Bar, Barista or Drinks). To move a whole category at once, use the Kitchen or Bar buttons on the category row. The Prep station choice appears only after the station switch in step 2 is on.
Map each role to a printer in RestroFi Connect
On the PC that prints, open RestroFi Connect → Printers. Under Printer mapping choose a printer for Counter (Bills), Kitchen (KOT) and Bar (KOT). Press Test on each row to confirm the slip comes out of the printer you expect. On first setup Connect assigns the first detected printer to every empty row, so check the rows after adding a second printer.
If you print from a tablet
In the RestroFi app open More → Printers. Under 'What this printer prints' switch on only what that printer should take: Bills, Kitchen tickets, Bar tickets. One printer can take all three.
If a drink still prints in the kitchen
The item is still set to Kitchen. Edit the item and change Prep station. Items added later to a running table follow the same station, so the change applies to new orders and new rounds.
Related articles
How to add a printer (USB, Wi-Fi or LAN, Bluetooth)
Printers are added on the device that talks to them, not in the browser. On a billing PC use RestroFi Connect → Printers (USB, Wi-Fi or LAN, Bluetooth). On a tablet or phone use the RestroFi app → More → Printers (Bluetooth on Android, Wi-Fi or LAN on Android and iPhone or iPad).
KOT or bill is printing twice (double print)
A double print almost always means two devices are both set to print for the outlet: a tablet and a Connect till together, or two Connect PCs with the same role. Keep only one device on each role.
Printer is not printing KOTs or bills
Open Dashboard → Settings → KOT & Printer Connect. The Printers card at the top tells you the exact reason: printing switched off, no printer assigned, device offline, or the last ticket failed. Fix that reason, then send a test print.
Change what prints on the bill and KOT (paper width 58 or 80 mm, GSTIN, address, logo, template)
Go to Dashboard → Settings → Print. Choose the paper width, the KOT and bill templates and which fields show, then press Save print settings. The GST number and address themselves are edited in Dashboard → Settings → Business.
Still stuck?
If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].