Skip to main content

Bill or KOT prints strange characters, is cut off, or leaves half the paper blank

Applies toRestroFi Connect (desktop)· Updated

Short answer

The printer type or paper width chosen in RestroFi Connect does not match the printer. In RestroFi Connect → Printers press 'Find the right setting' on that row and pick the strip that printed correctly.

Steps

  1. Use Find the right setting

    In RestroFi Connect open Printers. On the row of the printer that prints wrongly, press 'Find the right setting'. Connect prints one short lettered strip for each setting. Look at the paper and tap the letter of the strip that is readable. Connect saves that setting. If more than one is readable, choose the one marked Recommended.

  2. Or choose the printer type yourself

    Each row has a dropdown asking what kind of printer it is.

    • Thermal receipt printer: takes a 58 mm or 80 mm roll, no ink or ribbon. Most counter bill printers.
    • Dot-matrix printer: uses an ink ribbon and is noisy while printing.
    • Any Windows printer (uses its driver): office inkjet or laser printers that print on A4 or A5 sheets.
  3. Fix the width

    For a thermal receipt printer choose 58mm or 80mm in the width dropdown on the row. For a dot-matrix or Windows printer choose the columns (characters per line). For a Windows printer, 'Auto (fit page)' fits the paper the driver reports.

  4. Bill printer on sheets (A4, A5)

    When the bill printer uses its Windows driver, a Paper section appears on the Counter (Bills) row. Choose the paper, press Print test bill, check the print, then press 'Yes, confirm this paper'. If the driver's paper changes later, bills wait on the Printers screen with the choices 'Print anyway (driver paper)' and 'Reconfirm paper' instead of printing wrongly.

  5. Print is too light

    For a thermal receipt printer use the Print darkness dropdown on the row: Normal, Dark or Darkest.

  6. Paper does not cut

    For a roll printer that prints through its Windows driver, tick 'Cut paper after printing' on that row. A sheet printer cannot cut paper.

  7. Label printers

    Sticker label printers are not supported for bills and KOTs.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].