Skip to main content

Change what prints on the bill and KOT (paper width 58 or 80 mm, GSTIN, address, logo, template)

Applies toWeb dashboardRestroFi Connect (desktop)Phone app· Updated

Short answer

Go to Dashboard → Settings → Print. Choose the paper width, the KOT and bill templates and which fields show, then press Save print settings. The GST number and address themselves are edited in Dashboard → Settings → Business.

Steps

  1. Open the print settings

    Go to Dashboard → Settings and open the Print tab. These choices apply to kitchen tickets and customer bills, both for browser printing and for RestroFi Connect.

  2. Receipt paper

    Under Receipt paper choose 80 mm (standard wide roll) or 58 mm (narrow 2 inch roll). Pick 58 mm if your printer uses the narrow roll so tickets and bills are laid out to fit.

  3. KOT template and fields

    Choose Classic, Compact or Large & Bold. Under KOT fields switch on or off: KOT number, Order type, Biller name and Item special notes. Every KOT always prints the date and time, items with quantities and any order note. Prices never print on a KOT.

  4. Bill template and fields

    Choose Classic (full receipt) or Compact (trimmed for short rolls). Then use the switches Show address, Show phone, Show GSTIN and Show logo. The logo is included on HTML and PDF bills.

  5. Save

    Press Save print settings at the bottom. The previews on the page show what will print.

  6. Fix a wrong or missing GST number, FSSAI, address or phone

    The switches only show or hide a field. To change the value, go to Dashboard → Settings → Business, edit GSTIN, FSSAI licence number, address or phone, and save. GSTIN must be 15 characters and FSSAI must be 14 digits.

  7. Paper width on the printing device

    Each printing device also has its own width. In RestroFi Connect → Printers the width (58mm or 80mm) is a dropdown on each printer row. In the RestroFi app it is under More → Printers → Paper & layout. If the bill is still too wide or too narrow, correct it there as well.

  8. What cannot be changed here

    There is no setting for a custom footer message on the bill in the Print tab. If you need one, send the request to support.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].