Skip to main content

New order sound in RestroFi Connect: turn it on, change it, or fix no sound

Applies toRestroFi Connect (desktop)Web dashboard· Updated

Short answer

Open Connect → Settings and switch on 'Enable alert sounds on this device', then set the volume and the sound. The outlet-wide switch 'Play sound on new orders' in Dashboard → Settings → Alerts must also be on, or the new-order sound stays silent everywhere.

Steps

  1. Switch on sounds on the PC

    In RestroFi Connect open Settings. Tick 'Enable alert sounds on this device'. This setting is saved on that PC only, so check it on every till.

  2. Set the volume and the sound

    Move the Volume slider. Under 'New order sound' choose Chime, Bell, Ping, Marimba or Alert (urgent), and press Preview to hear it. 'Call-staff sound' is set separately in the same card.

  3. Check the outlet-wide switch

    In the browser go to Dashboard → Settings → Alerts. In the 'Order sound alerts' card switch on 'Play sound on new orders' and save. When this is off, the new-order sound is muted on every device, even if the PC setting is on.

  4. Check the PC itself

    If Preview makes no sound, the problem is the PC: check that the speakers are connected, the PC volume is up and not muted, and the right output device is selected in the sound settings of the PC.

  5. How the alerts behave

    A new order plays the sound once and shows a 'New order' notification with the order number and table. A call-staff request keeps ringing until someone attends it on the Tables screen.

  6. No alert at all

    Alerts play only while Connect can reach RestroFi. If the Cloud indicator in the top bar is off, new customer orders have not reached the till yet.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].