Short answer
Create each guest room under Tables & QR with the type Room. Every room gets its own QR code that you print and keep in the room. Guests can order from it after you check them in.
Steps
Check that rooms are available for your outlet
Room billing is for hotel restaurants and farmhouse or resort outlets on the Premium plan and above. Other outlets with guest rooms can unlock it with the Direct Bookings add-on from Dashboard → Marketplace. If the Rooms page says room billing is not enabled, this is the reason.
Open the tables page
Go to Dashboard → Tables & QR. For a hotel restaurant the same page is called Rooms & QR Codes in the sidebar, and for a farmhouse it is called Tables, Rooms & QR Codes.
Add many rooms at once
Press Add rooms. You can create a range of rooms in one go, for example 101 to 110. Room numbers start from 101 by default and the floor is filled in from the room number. Each room gets its own QR code.
Or add one room
Press Add table, then change Type to Room. Enter the Room number (for example 101 or Cottage 2), the Room rate (₹ / night) if you want room rent on the bill, the floor and the number of Guests, then press Add room. The room rate is used to work out the room charge at checkout and can be changed for each stay at check-in.
Print the QR codes
Each room card has a QR button to download that QR and a PDF option for a print-ready file. To print all of them together, press All QR codes, choose Rooms and how many QR codes per page, and download the PDF. Place each printed QR in its own room.
Check a guest in before they order
A room QR accepts orders only while the room is checked in. Open Dashboard → Rooms, find the room and press Check in guest. Until then, a guest who scans the QR sees a message asking them to contact reception.
Renaming or deleting a room
You can rename a room at any time. The printed QR keeps working after a rename. Deleting a room removes its QR code permanently, so any printed sticker for it stops working and this cannot be undone.
Related articles
How room billing works: check-in, the running room bill and checkout
Check the guest in from Dashboard → Rooms to open the room bill. Every order from that room is added to it. At checkout you collect the full amount once and close the bill.
Room bill looks wrong or an order is missing from the room bill
Most often the order was paid separately, was placed on a table instead of the room, or the room was not checked in at the time. Open the room bill from Dashboard → Rooms and check each order's status and the number of nights.
How room QR codes work for hotels and resorts
Create rooms under Tables & QR and place each room's QR in the room. A guest can order from the room QR only after the room is checked in, and the food bill is added to the room bill and settled at checkout.
How to create tables and download or print QR codes
Go to Dashboard → Tables & QR. Use Add table or Bulk add to create tables. Each table gets its own QR automatically. Download one QR, all of them, or a print-ready PDF.
Still stuck?
If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].