Skip to main content

The QR code is not opening or shows an error for the customer

Applies toCustomer sideWeb dashboard· Updated

Short answer

Ask the customer to scan the sticker again with mobile data or Wi-Fi on. The message on their screen tells you the cause: an invalid or deleted table QR, a refreshed QR, too many scans, or the outlet not accepting orders.

Steps

  1. Scan again with internet on

    Ask the customer to check that mobile data or Wi-Fi is working, then scan the table sticker again with the phone camera. If the screen shows Something went wrong, tap Try again. Most scan problems are a weak connection at the table.

  2. Read the message on the customer's screen

    The menu shows a clear title when a scan fails. Each one has a different cause.

    • Invalid QR code: the QR does not match any table. The table was deleted from Tables & QR, or the sticker is from another outlet or a very old print. Print a fresh QR for that table.
    • QR has been reset: the customer opened an old link saved before you refreshed that table's QR. Scanning the sticker again fixes it. The printed sticker itself never changes.
    • Too many scan attempts: the same phone or network scanned too many times in a short while. Wait a few minutes and scan once.
    • Not accepting orders: the outlet account is not active. Contact support.
  3. If the menu opens but ordering is blocked

    A message such as This restaurant is closed right now or The kitchen is closed right now means the scan worked but the order was placed outside your hours. Check Dashboard → Settings → Hours. A room QR shows a message that the room isn't checked in yet until the guest is checked in.

  4. If the customer opened a link instead of scanning

    A customer who opens your menu link without scanning a table QR can browse, but adding items shows Scan the QR at your table to start ordering. They must scan the sticker on their table. Ordering without a table QR works only if you have Takeaway or Delivery turned on under Dashboard → Settings → Business → Service channels.

  5. Test the sticker yourself

    Scan the same sticker with your own phone. If it opens for you, the problem is on the customer's phone or network. If it fails for you too, open Dashboard → Tables & QR, find the table and download its QR again to compare with the printed one.

  6. About refreshing a QR

    The refresh button on a table card (Refresh QR, no reprint) and Refresh ALL QRs do not change the printed sticker. They only sign out anyone currently ordering on those tables, who can then scan the same sticker to start fresh. You do not need to reprint after a refresh.

  7. Damaged or badly printed stickers

    If the camera cannot read the code at all, the print is the problem. Reprint from Dashboard → Tables & QR using Print all (PDF) or the PDF button on that table, and avoid printing the code very small or on a glossy curved surface.

Still stuck?

If you use RestroFi, sign in and raise a ticket from Dashboard → Support so we can see your outlet. You can also email [email protected].